Document Feedback - Review and Comment
Step 1 of 4: Comment on Document
How to make a comment?
1. Use this to open a comment box for your chosen Section, Part, Heading or clause.
2. Type your feedback into the comments box and then click "save comment" button located in the lower-right of the comment box.
3. Do not open more than one comment box at the same time.
4. When you have finished making comments proceed to the next stage by clicking on the "Continue to Step 2" button at the very bottom of this page.
Important Information
During the comment process you are connected to a database. Like internet banking, the session that connects you to the database may time-out due to inactivity. If you do not have JavaScript running you will recieve a message to advise you of the length of time before the time-out. If you have JavaScript enabled, the time-out is lengthy and should not cause difficulty, however you should note the following tips to avoid losing your comments or corrupting your entries:
-
DO NOT jump between web pages/applications while logging comments.
-
DO NOT log comments for more than one document at a time. Complete and submit all comments for one document before commenting on another.
-
DO NOT leave your submission half way through. If you need to take a break, submit your current set of comments. The system will email you a copy of your comments so you can identify where you were up to and add to them later.
-
DO NOT exit from the interface until you have completed all three stages of the submission process.
(1) This guidance provides an overview of the responsibility of individuals and institutions to identify, declare and manage conflicts of interest in the research context. (2) It supports the Conflict of Interest Policy and Conflict of Interest Management Procedure. It is designed to be read alongside the more detailed RMIT Guide to Responsible Management of Conflicts of Interest in Research, as well as other relevant Codes and Guides, including the Australian Code for the Responsible Conduct of Research. (3) Guidance on conflicts of interest in the research training context is addressed separately in the HDR Supervision Arrangements Procedure and the Australian Council for Graduate Research Conflict of Interest Good Practice Guidelines for Disclosing and Managing Interests in Graduate Research. (4) Guidance on all other conflicts of interest is addressed in the Conflict of Interest Policy and Conflict of Interest Management Procedure. (5) Authority for this guidance note is established by the Conflict of Interest Policy. (6) This guidance applies to all staff, students, visiting researchers and honorary and adjunct appointees undertaking or supporting research at all RMIT University campuses and external research locations, and any research RMIT University is obliged to consider. (7) The Australian Code for the Responsible Conduct of Research (The Code) defines a conflict of interest as ‘as a situation where an independent observer might reasonably conclude that the professional actions of a person are or may be unduly influenced by other interests’. (8) Under the Code (see Responsibilities of Researchers - R24) and RMIT policy, all individuals involved in research at RMIT have a responsibility to identify, declare and manage conflicts of interest whether they be actual, perceived or potential in nature. (9) Individuals involved in research have a responsibility under the Code (R16) to undertake training and education in responsible research conduct, including the management of conflicts of interest. (10) In accordance with NHMRC guidance on conflicts of interest, RMIT also has a responsibility to maintain a record of institutional interests that may be perceived to affect the design, conduct, review, and dissemination of research and appropriately manage any conflicts identified. (11) Individuals involved in research should consider the potential for conflicts arising from all possible interests. Such interests may include but are not necessarily limited to the following: (12) A conflict of interest may inappropriately affect, or be perceived to affect the following aspects of research conduct: (13) It should be noted that competition and enmity, as well as alignment, collaboration, and friendship, may give rise to actual or perceived conflicts of interest. (14) Primary responsibility for identifying a conflict of interest lies with the individual to whom the interest accrues, and the process of identifying conflicts of interest should be consistent with the definitions, principles, and essential requirements of the Code and RMIT Policy. RMIT’s Network of Research Integrity Advisors can provide individuals with advice to help in their identification and assessment of conflicts of interest, as needed. (15) Disclosure of an identified research-related conflict of interest must be made to a relevant manager in accordance with the Conflict of Interest Management Procedure. (16) Interests must be declared via the Conflict of Interest Declaration form. (17) Where there is doubt or uncertainty as to whether a conflict of interest exists, the interest in question should be declared. (18) Individuals involved in research should also: (19) Once a conflict has been identified and disclosed it must be managed. This is a joint responsibility of the individual and the relevant manager/s. (20) Individuals should not solely manage their own conflicts of interest, as this is not appropriate and may heighten an observer’s perception of bias, undue influence and/or unfairness. (21) The appropriate approach is for individuals to consult and involve the relevant manager/s in the management of the conflict. Where there is any divergence or disagreement between an individual and the relevant manager/s in the approach to, or plan for, management of a conflict of interest, the approach of the management team will take precedence. (22) Conflict of interest management plans must be documented via the Conflict of Interest Declaration form. (23) Conflicts of interest pertaining to HDR supervision must be managed in accordance with clause 9 of the HDR Supervision Arrangements Procedure. (24) In declaring a conflict of interest, individuals should suggest an approach and put forward a draft plan for managing a conflict of interest in a research context to the relevant manager/s. For guidance on management strategies suitable to the level of identified risk, individuals should refer to the ‘6Rs’ of Conflict-of-interest Management, elaborated in the Guide to the Management of Conflicts of Interest. (25) Individuals should work collaboratively with the relevant manager on the management of a conflict of interest, wherever appropriate. (26) Managers are responsible for reviewing the approach and draft plan for managing a conflict of interest in a research context and ensuring appropriate management in compliance with the Conflict of Interest Management Procedure. (27) Managers should assess the risks a declared conflict of interest presents and develop a management plan and strategy that is appropriate for use in a research context and commensurate with risks identified. (28) Managers should refer to the ‘6Rs’ of conflict of interest management elaborated in the Guide to the Management of Conflicts of Interest for guidance on management strategies suitable to the level of risk identified. Managers should work collaboratively on a management plan with the individual subject of a conflict of interest declaration, wherever appropriate. (29) All individuals involved in research at RMIT have a responsibility to identify, declare and manage conflicts of interest appropriately and in line with the Australian Code and RMIT policy. (30) A failure to appropriately identify, declare and manage conflicts of interest in compliance with RMIT Policy may: (31) Alleged breaches of RMIT Policy and the Code of Conduct will be managed in accordance with the Code of Conduct and the Workplace Behaviour Policy. (32) Alleged breaches of research integrity as established in the Australian Code will be reported and managed in accordance with the Research Policy and Research Integrity Breach Management Procedure. (33) Where it is believed that a conflict of interest involves illegal or dishonest behaviour, a report can be made to Stopline in accordance with the Whistleblower Procedure. (34) For conflicts of interest in a research context, refer to the following RMIT documents: (35) For conflicts of interest in a research training context, refer to:Guidance Note on Conflicts of Interest in Research
Section 1 - Purpose
Section 2 - Authority
Section 3 - Scope
Section 4 - Guidance
Guiding Principles
Identifying Conflicts of Interest
Declaring Conflicts of Interest
Managing Conflicts of Interest
Individuals
Managers
Compliance
Section 5 - Definitions and References
Top of Page
The Australian Code for the Responsible Conduct of Research
The Australian Code for the Responsible Conduct of Research (the Code) sets out principles and responsibilities of trustworthy research. It was developed by the National Health and Medical Research Council (NHMRC), the Australian Research Council (ARC) and Universities Australia.
Actual conflict of interest
In a research context: Where there is a real divergence between the interests of research integrity and the interests of a person or organisation.
Perceived conflict of interest
In a research context: Where a third party could reasonably form the view that a person or organisation’s interests could improperly influence those of research integrity.
Potential conflict of interest
In a research context: Where a person or organisation has interests that could conflict with research integrity. This refers to circumstances where it is foreseeable that a conflict may arise in future, and steps should be taken now to mitigate that risk.
Section 6 - Resources